Add Digits Dialog Box - NEC Dterm PSIII User Manual

3-18 Using the PSIII
Figure 3-14 Add Digits dialog box
NOTE
Press the "2" key once for "A," twice for "B," three times for
Example:
"C" and four times for the number "2." Press the SHIFT key to
shift to lower case mode.
When the name is complete, press the FNC key. An Add Digits dialog
Step 4
box displays (Figure
Add Digits?
Type in the desired number. If a pause is required (for example, after
Step 5
entering 9 to gain access to an outside line), press HOLD to insert a
pause.
Press the FNC key to enter.
Step 6
Press the FNC key again to confirm.
Step 7
After the registration is complete, a setting tone will ring. After two
seconds, the Directory Menu page will redisplay.
Do not remove the battery for at least one minute after entering a Directory or Speed
Dial entry.
To Edit a Directory Entry
Press FNC+1+1. A Directory dialog box displays
Step 1
Select [2] Edit and then press the FNC key or 1.
Step 2
Press the Scroll
Step 3
Press the Scroll
Press the FNC key to select the entry to edit.
Step 4
To edit the name, press the Scroll
Step 5
letter.
Press CLEAR to delete the letters or place the cursor at the desired
Step 6
location and enter additional letters.
To edit the telephone number press the Scroll
Step 7
Press CLEAR to delete the numbers. Type additional numbers to
Step 8
change the entry.
Press the FNC key twice to confirm the change, or press END/PWR to
Step 9
cancel.
3-14).
key to search the Directory in alphabetical order.
key to search in reverse order.
key or Scroll
Dterm PSIII User Guide - Revision 1
(Figure 3-13).
key to highlight the
key.