Led Flash; Led Flash Dialog Box - NEC Dterm PSIII User Manual

3-26 Using the PSIII
Figure 3-26 LED Flash dialog box
NOTE

LED Flash

This feature controls the LED Ring Indicator. A Red Light indicates an
incoming call.
To Turn On LED Flash
Press FNC+3+1+7. A LED Flash dialog box displays
Step 1
LED Flash
[1]On
[2]Off
For Mode 2* systems, select [1] On and then press the FNC key or 1.
Step 2
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
To Turn Off LED Flash
Press FNC+3+1+7. A LED Flash dialog box displays
Step 1
For Mode 2* systems, select [2] Off and then press the FNC key or 2.
Step 2
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
*Mode 2 features are only available with NEAX 2000 (Series 1900 software or later)
and NEAX 2400 (Series 7300 software or later). Zone Transceiver 5.00 software (or
later) must be used.
(Figure 3-26).
(Figure 3-26).
Dterm PSIII User Guide - Revision 1