Call Forwarding; Call Forwarding Key; Confirmation Tone Added; Soft Key And Type Enhancements - NEC DS1000 Manual
Feature handbook supplement
Hide thumbs
Also See for DS1000:
- Feature handbook (216 pages) ,
- Correspondence course workbook (174 pages) ,
- Product description (174 pages)
Table of Contents
Advertisement
Features
Call Forwarding
Call Forwarding Key
Confirmation Tone Added
Soft Key And Type Enhancements
2
G
Receive an Intercom voice announcement or answer an Intercom call by lifting the hand-
set or pressing SPK .
G
Press SPK to cancel Auto Redial.
G
Lift and replace the handset.
G
Press the CANCEL soft key (Super Display only).
Note: If a Caller ID call rings while Auto Redial is enabled, your display will show the number
and optional name of the incoming caller. However, the ringing does not cancel Auto Redial.
In addition, the Auto Redial display will be restored after the Caller ID call stops ringing.
You can have a key on your telephone or DSS Console assigned as a Call Forwarding key.
G
While the extension is idle , pressing the key puts your extension in the Call Forwarding pro-
graming mode - the same as pressing ICM and dialing *3.
If you have Call Forwarding enabled, and you press the key and wait (for at least 6
seconds), Call Forwarding automatically cancels.
If you have Call Forwarding disabled, and you press the key and wait (for at least 6
seconds), the prior Call Forwarding mode is automatically enabled (if any).
G
While your extension is busy , pressing the key switches Call Forwarding on and off.
This flash rate:
Off
Fast flash
Wink off
To set up your Call Forwarding Key, use the #KP User Programmable Features (code 27). Ask your
Communications Manager if you have access to the Use Programmable Features.
You will hear a single confirmation beep after enabling or cancelling Call Forwarding.
If you have a display telephone, you can set up Call Forwarding by using your dial pad or your new
soft keys. In addition, you can set up Call Forwarding to reroute all calls or just trunk calls.
If you have a 22-Button or 34-Button Display Telephone
To activate Call Forwarding:
1.
Press ICM and dial *3 , or press your Call Forwarding key.
OR
Press PGM + CFWD .
Call Forwarding Key BLF
Call Forwarding is disabled.
The extension is in the Call For-
warding programming mode.
Call Forwarding is enabled at the
DS1000/2000 Feature Handbook Supplement
Means:
extension
Advertisement
Table of Contents
