The Lcd Display - NEC Dterm PSIII User Manual

3-2 Using the PSIII
Table 3-1 Display Symbols

The LCD Display

Symbol
L 1
L 2
Description
To view digits overflowing to the left and to the right.
To view line overflowing.
Off-hook - indicates the PSIII is off-hook
Signal strength - indicates strength or weakness of the signal being
received. The antenna picture display lights as the PSIII powers up,
indicating that the PSIII can make a call.
Envelope indicates user has a voice mail message or short text
message.
Keylock status lights when Keylock is on.
ANS indicates that Auto Answer is active.
Battery indicates charge level. A solid battery indicates a strong
charge.
V indicates that incoming call vibration notification is active.
S indicates that incoming ring volume is silent.
indicates that courtesy mode is on.
A lit L1 indicates a user can make a call.
A lit L2 indicates a user can make a call on the second line.
*Mode 2 features are only available with NEAX 2000 (Series
Note:
1900 software or later) and NEAX 2400 (Series 7300 software
or later). Zone Transceiver 5.00 software (or later) must be
used.
Dterm PSIII User Guide - Revision 1