To Use Courtesy Mode; Keypad Lock; No Service; Courtesy Mode Screen - NEC Dterm PSIII User Manual

Figure 3-12 Courtesy Mode screen
NOTE
NOTE
Dterm PSIII User Guide - Revision 1

To Use Courtesy Mode

Courtesy mode enables an incoming call to vibrate rather than ring.
To enable Courtesy Mode, press CLEAR and hold it down for more than
Step 1
two seconds. A Courtesy Mode screen displays for Mode 2* systems.
J. KRAUSER
To disable Courtesy Mode, press CLEAR and hold it down for more than
Step 2
two seconds.
If DEFAULT SET or RESET ALL is used, Courtesy Mode will be disabled.

Keypad Lock

Keypad Lock allows you to carry your PSIII without inadvertently
activating the phone.
To lock the keypad, press HOLD for more than two seconds. A key icon
Step 1
displays on the PSIII.
After locking the keypad, you can still receive incoming calls.
To unlock the Keypad, press HOLD for more than two seconds.
Step 2

No Service

If No Service is displayed on your PSIII, it is out of the service area.
The PSIII cannot be used until it is within your wireless coverage area. A
No Service indication may also indicate that the number of visitors limit
has been exceeded when roaming.
To remove the No Service display, turn your PSIII off by pressing the
Step 1
END/PWR key and holding for more than two seconds.
L1:12345
L2:90000
Using the PSIII 3-11