Name Dialog Box; Brightness Dialog Box - NEC Dterm PSIII User Manual

3-44 Using the PSIII
Figure 3-59 Name dialog box
Figure 3-60 Brightness dialog box
Select [1] Set and then press the FNC key or 1. A Name dialog box
Step 2
displays (Figure
Name?
My HANDSET
Press the CLEAR key to delete the displayed characters and then type
Step 3
in the name.
Press the FNC key to enter.
Step 4
Press the FNC key to confirm.
Step 5
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
To Reset Name
Press FNC+3+6+3. A Name Entry dialog box displays
Step 6
Select [2] Reset and then press the FNC key or 2. The default setting is
Step 7
displayed.
Press the FNC key to enter.
Step 8
A setting tone will ring and then the PSIII returns to a standby state after
two seconds.
To Adjust Brightness
To set the brightness of the PSIII display, press FNC+3+6+4. A
Step 1
Brightness dialog box displays
Brightness
1 2 3 4 5 6 7 8 9
Press the Scroll
Step 2
brightness.
3-59).
(Figure 3-60).
key to lighten or Scroll
Dterm PSIII User Guide - Revision 1
(Figure 3-58).
key to darken the display