4.19 Fan
Removing the Fan
To remove the fan, follow the steps below and refer to Figure 4-29.
1. Peel off the glass tape.
2. Disconnect the fan cable from the connector CN8770 on the system board.
3. Remove the following screws and fan.
• M2.5×4B
Fan cable
M2.5×4B FLAT HEAD
Fan
TECRA S3 Maintenance Manual (960-532)
FLAT HEAD screw
CN8770
Figure 4-29 Removing the fan
×2
Glass Tape
M2.5×4B FLAT HEAD
[CONFIDENTIAL]
4-45