Toshiba Tecra S3 Maintenance Manual page 273

Personal computer

Hide thumbs Also See for Tecra S3:

Table of Contents

Installing the Switch membrane

To install the switch membrane, follow the steps below and refer to Figure 4-17.

1. Install the switch membrane in place and secure it with the following screw.

2. Connect the switch cable to the connector CN3260 on the system board.

3. Slide the switch cover to the below to install and secure it with the following screw.

[CONFIDENTIAL]

M2.5×4B FLAT HEAD screw

TECRA S3 Maintenance Manual (960-532)

Chapters

Table of Contents