Toshiba Tecra S3 Maintenance Manual page 261

Installing the Wireless LAN card
To install the wireless LAN card, make sure the computer is in boot mode and powered off,
follow the steps below and refer to Figure 4-7.
CAUTION: Be sure to switch the computer off before installing the wireless LAN card.
Otherwise, the computer or the wireless LAN card may be damaged.
1. Insert the wireless LAN card into the connector of the slot slantwise and press it to
connect firmly.
CAUTION: Match the ditch of the wireless LAN card to the guide of the slot.
2. Gently push the wireless LAN card down until the latches on the both sides are
engaged.
3. Connect the wireless LAN antenna cables (black AUX and white MAIN) to the
connectors on the wireless LAN card and stick the insulator in place.
4. Seat the wireless LAN card cover and secure it with the following screw.
• M2×4B
4-18 [CONFIDENTIAL]
BIND screw
×1
TECRA S3 Maintenance Manual (960-532)