Toshiba Tecra S3 Maintenance Manual page 263

3. Remove the following screws, connector cover and connector from the optical drive
assembly.
• M2×6S
4. Remove the following screw and connector cover from the optical drive assembly.
• M2×3S
5. Remove the following screws and connector cover holder from the optical drive
assembly.
• M2×6S
• M2×22S BIND screw
M2×22S BIND
M2×6S BIND
4-20 [CONFIDENTIAL]
BIND screw
S-FLAT HEAD screw
BIND screw
M2×3S S-FLAT HEAD
Figure 4-9 Detaching the optical drive assembly
×2
×1
×1
×1
M2×6S BIND
TECRA S3 Maintenance Manual (960-532)
M2×6S BIND