Toshiba Tecra S3 Maintenance Manual page 297

5. Remove the following screws and PC card slot from the back of the system board.
• M2×8B
• M2×3S
PC card slot
M2×3S S-FLAT HEAD
6. Remove the following screws and north bridge IC heat sink from the back of the
system board.
• M2×4S
Figure 4-39 Removing the north bridge IC heat sink
TECRA S3 Maintenance Manual (960-532)
S-FLAT HEAD screw
S-FLAT HEAD screw
Figure 4-38 Removing the PC card slot
S-FLAT HEAD screw
×2
×2
M2×8B S-FLAT HEAD
×2
M2×4S S-FLAT HEAD
[CONFIDENTIAL]
North bridge IC
heat sink
4-54