Toshiba Tecra S3 Maintenance Manual page 258

NOTE: The following steps describe how to disassemble the HDD assembly; however, do
not disassemble if the HDD is working properly.
3. Place the HDD assembly on a flat surface, and remove the following screws.
• M3×4S
4. Separate the HDD and the HDD bracket.
CAUTION: Do not apply pressure to the top or bottom of the HDD.
M3×4S FLAT HEAD
TECRA S3 Maintenance Manual (960-532)
FLAT HEAD screw
HDD
Figure 4-6 Separating the HDD
×4
M3×4S FLAT HEAD
HDD bracket
[CONFIDENTIAL] 4-15