Cd Sound (Standard) Test - Toshiba Tecra S3 Maintenance Manual

3.30.2

CD Sound (Standard) test

To execute the CD Sound (Standard) test, press 3 and Enter. Insert the test media
(TOSHIBA TEST CD-ROM or ABEX TEST CD-ROM) or music CD on the market (if the
test media can not be prepared). Following menu appears in the display.
For details on use of test media, refer to 3.30.3.1 Test media (Toshiba-made test media).
For details on use of audio CD on the market, refer to 3.30.3.2 Audio CD.
3.30.3.1 Test media (Toshiba-made test media)
CD/DVD TEST IN PROGRESS XXXXXXXX
SUB-TEST : XX
PASS COUNT : XXXXX
WRITE DATA : XX
ADDRESS : XXXXXX
01 – Japanese Narration
02 – English Narration
03 – Test Tone A (100Hz – 20Hz)
04 - Test Tone B (400Hz – 3KHz L-R)
Subtest01 Japanese Narration
Selected this subtest, narration in Japanese starts and following message
appears in the display.
Play start CD sound !
Press any key <Play stop>.
Press any key and stop the narration. Then return to the CD Sound (Standard)
test menu.
Subtest02 English Narration
Selected this subtest, narration in English starts.
For more details on the procedure, refer to the subtest01.
TECRA S3 Maintenance Manual (960-532)
xxxxxxx DIAGNOSTIC TEST VX.XX
[Ctrl]+[Break] : test end
[Ctrl]+[C]
ERROR COUNT : XXXXX
READ DATA : XX
STATUS : XXX
Drive # = 0, ATAPI status =00
Command = XX
[[Block address = XXXXXXXX]]
[[Block length
Final : Block address = XXXXXXXXX
[CONFIDENTIAL]
Tests and Diagnostics
: key stop
= XXXXXXXX]]
3-97
Formatted: Bullets and
Numbering