Table of Contents
Advertisement
Restoring the configuration details
You will be able to restore the configuration details only if you backup the
configuration using the steps mentioned in the above section. Run the following
commands to restore the configuration:
v <Deployment Maneger Installed Path>/WASND/Profiles/<ProfileName>/bin/
v <WPG Components Installed Path>/WASND/Profiles/<ProfileName>/bin/
Changing host name and IP address of WebSphere Partner Gateway
The following sections provide detailed steps to change host name or IP address of
WebSphere Partner Gateway components. Refer to the appropriate section based
on WebSphere Partner Gateway installation mode.
Note: Stop the server before you start executing the steps provided for changing
the host name and IP address.
Simple mode
Follow these steps:
1. Ensure that you backup the configuration files before making any significant
2. Change the data source; execute bcgChangeDataSource.bat\sh with new Host
3. Change the host name; execute bcgChangeNodeHostname.bat\sh with new
Note: Up on successful completion of host name/IP address change, the
application servers will start automatically.
Distributed mode
Follow these steps:
1. Ensure that you backup the configuration files before making any significant
2. Change the DMGR profile; executebcgChangeDmgrHostname.bat\sh with new
152
IBM WebSphere Partner Gateway Enterprise and Advanced Editions: Administration Guide
v <WPG Components Installed Path>/WASND/Profiles/<ProfileName>/bin/
backupConfig.bat. Run this command on all machines where WebSphere
Partner Gateway components are installed.
restoreConfig.bat
restoreConfig.bat
changes. Refer to "Prerequisites" on page 151 section for more details.
name/IP address and Port number as the input parameters, that is
bcgChangeDataSource.bat\sh <New IP/Hostname> <PORTNUMBER>. This executable
is available in the folder <Installation directory of simple mode>/bin.
Host name/IP address as the input parameter, that is
bcgChangeNodeHostname.bat\sh <New IP/Hostname>. This executable is available
in the folder <Installation directory of simple mode>/bin.
changes. Refer to "Prerequisites" on page 151 section for more details.
Note: Stop the Deployment Manager, Node agent before executing the steps
provided for changing host name and port number.
Host name/IP address as the input parameter, that is
bcgChangeDmgrHostname.bat\sh <New IP/Hostname>. This executable is available
in the folder <Installation directory of Deployment Manager>/bin. This
command changes the host name/IP address of DMGR profile and starts the
deployment manager.
Advertisement
Table of Contents
