Table of Contents
Advertisement
HP-UX 11i
About this task
To enable tunneling on an HP-UX 11i , follow the steps below:
1. Login as the Root user.
2. To enable tunneling add the line IPV6_TUNNEL="1" to the file
3. Assign the following parameters in the file /etc/rc.config.d/netconf-ipv6:
4. Save the file and exit.
5. The changes can be activated in one of the following two ways:
Enabling IPV6
About this task
To configure IPV6, change the Java Virtual Machine parameter for runtime support
in the WebSphere Application Server console. To change the Java Virtual Machine
parameter:
1. Log in to the WebSphere Application Server Admin console.
2. Go to Servers > Application servers and select server.
3. Select each server and change the java.net.preferIPv4Stack property using
4. After you have changed the java.net.IPv4Stack for each server, a Full
5. Restart all of the servers.
82
IBM WebSphere Partner Gateway Enterprise and Advanced Editions: Administration Guide
/etc/rc.config.d/netconf-ipv6.
IPV6_DESTINATION[0]=
IPV6_GATEWAY[0]=" " (if set to 1 the gateway is
remote, if set to 0 the gateway is local)
IPV6_ROUTE_COUNT[0]=
IPV6_ROUTE_ARGS[0]=
See the comment text in the netconf-ipv6 file and the route(1m) man page for
more information.
v By rebooting the system.
v By issuing the ifconfig and route commands to make equivalent
configuration settings.
the following process:
a. Select the server (bcgdocmgr, bcgreceiver, or bcgconsole).
b. On the Configuration page, expand Java and Process Management in the
Server infrastructure section of the page and select Process Definition.
c. On the Process definition configuration page, select Java Virtual Machine in
the Additional Properties section.
d. Select Custom Properties.
e. Change the property java.net.IPv4Stack to false.
f. Click Apply and then Save to complete this configuration.
g. Repeat this process for each server.
Resynchronization of the node is required for Full Distributed Mode. To
resynchronize the node, go to System Administration> nodes and select
bcgnode. Click Full Resynchronize.
Note: The synchronization can take approximately 5 to 10 minutes.
Advertisement
Table of Contents
