Table of Contents
Advertisement
v BOOTSTRAP_ADDRESS
v SIB_ENDPOINT_ADDRESS
v WC_defaulthost
The port number must be any value in the range 0 to 65535.
Server type must be any of the following values:
v simple
v console
v router
v receiver
v simpledistributed
Relocation and redeployment examples
Depending on the WebSphere Partner Gateway installation and deployment
topology, you will have to run the relocation and redeployment scripts on one or
more machines. The following sections describe various scenarios where the
changes have to be updated, and the steps to update the same.
Example 1: Simple distributed installation
Here is a scenario where WebSphere Partner Gateway is installed in a simple
distributed mode. Assumptions are:
v Machine A - Database is installed
v Machine B - Deployment manager and WebSphere Partner Gateway components
Follow these steps to change the host name or IP address:
1. Ensure that you backup the configuration files before you make any significant
2. Change the host name or IP address of DMGR profile as described below:
3. Change the host name/IP address of the node on which the WebSphere Partner
154
IBM WebSphere Partner Gateway Enterprise and Advanced Editions: Administration Guide
are installed. Hostname of this machine is being updated.
changes. Refer to "Prerequisites" on page 151 section for details.
a. In Machine B where deployment manager is installed, execute
bcgChangeDmgrHostname.bat\sh with new Host name/IP address as the
input parameter, for example, bcgChangeDmgrHostname.bat 9.1.1.1. The
executable is available in the folder <Installation directory of
Deployment Manager>/bin. This command changes the host name/IP
address of DMGR profile and starts the deployment manager.
b. In Machine B, access the Node where WebSphere Partner Gateway
components are installed. Execute bcgChangeDmgrHostname.bat\sh with
new Host name/IP address and SOAP port as input parameters, for
example, bcgChangeDmgrHostname.bat 9.1.1.1 55880. The executable is
available in the folder <<Installation directory of hub>/bin>.
The host name/IP address of the deployment manager for the node on
Machine B is now changed. All the changes from the deployment manager will
be synchronized to this node.
Note: If there are multiple nodes, run these scripts for each node.
Gateway components are installed. Follow these steps:
a. In Machine B where deployment manager is installed, execute
bcgChangeNodeHostname.bat\sh with new Host name/IP address and
Advertisement
Table of Contents
