Table of Contents
Advertisement
Starting the servers when the Deployment Manager is
unavailable
About this task
If the Deployment Manager is unavailable for use, you can Start the messaging
bcgmas and the bcgserver servers manually with the following steps:
1. Confirm that the node agents are running for each node with the bcgmas server
2. Start each WebSphere Partner Gateway server by running the startServer
Stopping servers in a simple distributed mode system
When stopping servers in a simple distributed mode system stop the WebSphere
Partner Gateway component servers before stopping the messaging servers.
Stopping all the servers using the Deployment Manager
About this task
1. Select the bcgserverCluster and click Stop. Wait for the cluster to stop before
2. Select the messaging cluster bcgmasCluster and click Stop.
Stopping the individual servers on each computer
About this task
If you do not want to stop all servers in each cluster, you can stop the servers on
each computer where they are installed. To stop the servers on each computer,
perform the following steps:
1. Select the bcgserver server to stop and click Stop.
2. Repeat the previous step until you have stopped all of the servers you want to
3. Select the bcgmas server messaging you want to stop and click Stop.
4. Repeat the previous step until you have stopped all of the servers. If any of the
Stopping the servers when the Deployment Manager is
unavailable
About this task
First, stop the bcgserver servers before the messaging bcgmas servers.
1. Confirm that the node agents are running for each node with the bcgmas server
2. Stop each WebSphere Partner Gateway server by running the stopServer script
10
IBM WebSphere Partner Gateway Enterprise and Advanced Editions: Administration Guide
and the bcgserver installed.
script located in the <WebSphere Install Dir>/wasND/Profiles/bcgprofile/bin
directory on the computer where the server is installed.
The syntax is for starting the messaging server, console, receiver, or Document
Manager for the component servers is:
startServer <server_name>
Where server_name is bcgmas for starting the messaging server, and bcgserver
for the component servers.
performing the next step.
stop. Wait for the servers to stop before performing the next step.
bcgserver servers are still running then leave at least one bcgmas server
running.
and the bcgserver installed.
located in the <WebSphere Parnter Gateway Install Dir>/wasND/Profiles/
bcgprofile/bin directory on the computer where the server is installed.
Advertisement
Table of Contents
