Table of Contents
Advertisement
2. Click the View details icon next to a certificate. The Console displays the
3. Click the Edit icon to edit the digital certificate.
4. Update the following parameters in the window, then click Save.
Table 6. Digital Certificate Parameters
Parameter
Certificate name
Description
Status
Disabling a digital certificate
About this task
If you do not want to use a digital certificate, use the following procedure to
disable it.
1. Click Account Admin > Profiles > Certificates. The Console displays the
2. Click the View details icon next to the certificate you want to disable.
3. Click the Edit icon to edit certificate details.
4. For Status select Disabled.
5. Click Save.
Note: When a primary certificate is disabled, the corresponding secondary
certificate is made primary. When a secondary certificate is disabled, a warning is
displayed that there is no secondary certificate.
Changing B2B attribute values
About this task
To change the attribute values in a Document Definition, use the following
procedure.
Note: Changes to the attribute values for a higher-level Document Definition will
be inherited by the lower-level definitions within the same node.
1. Click Account Admin > Profiles > {Partner} >B2B Capabilities. The Console
2. Click to individually expand a node to the appropriate Document Definition
3. Click the Edit icon to modify the appropriate attribute values in the Update
4. Click Save.
Viewing Certificate Details window.
Description
Specify the name of the certificate.
Provide brief description about the certificate.
Select Enabled to show the status (valid or invalid) of the
certificate. Select Disabled to disable the certificate.
Digital Certificate List.
displays the B2B capabilities window.
level or select a number from 0–4 or All to expand all displayed Document
Definition nodes to the selected level.
column.
Chapter 5. Account administration tasks
53
Advertisement
Table of Contents
