Table of Contents
Advertisement
v Do not mix a production destination with a test destination when selecting
Source and Target; otherwise, an error occurs. Both the Source and the Target
must be production or test destinations.
1. Click Account Admin > Connections > Partner Connections. The Console
displays the Manage Connections window.
2. Click Advanced Search in the upper right corner of the window.
3. Complete the following parameters as shown in Table 8:
Table 8. Advanced Search window
Parameter
Search By Partner Name
Search By Business ID
Source Package
Target Package
Source Protocol
Target Protocol
Source Document Type
Target Document Type
Connection Status
4. Click Search. The system finds the connections that match your criteria.
Changing connection configurations
About this task
To change the configuration of a connection, use the following procedure.
1. Click Account Admin > Partner Connections. The Console displays the
Manage Connections window.
2. Perform a basic search for connections (see "Performing a basic search for
connections" on page 56) or advanced search for connections ("Performing an
advanced search for connections" on page 56).
3. See the appropriate section:
v "Changing partner attribute values"
v "Selecting a new action" on page 58
v "Selecting a new transformation map" on page 58
v "Changing the destination or return destination" on page 58
v "Disabling or deactivating a connection" on page 58.
Changing partner attribute values
About this task
To change partner attribute values, use the following procedure.
1. Click Attributes for either the Source or Target partner.
Description
Names of the Source and Target.
Business IDs of the Source and Target. Includes DUNS,
DUNS+4, and Freeform.
Package used by the Source.
Package used by the Target.
Protocol used by the Source.
Protocol used by the Target.
Document type used by the Source.
Document type used by the Target.
Enables the search for enabled and disabled connections.
Chapter 5. Account administration tasks
57
Advertisement
Table of Contents
