Installing Fabric Clothing Guards - Invacare Compass XE Owner's Operator And Maintenance Manual

SECTION 6—ARMS

Installing Fabric Clothing Guards

NOTE: For this procedure, refer to FIGURE 6.21.
1. Remove the seat cushion, if necessary.
2. Secure the fastening straps of the fabric clothing protectors to the seat upholstery.
3. Reinstall the seat cushion, if necessary.
4. Remove the two mounting screws that secure the back upholstery to the back canes.
5. Position the D‐rings on the mounting holes in the back canes.
6. Reinstall the two mounting screws and securely tighten.
7. Run the nylon cord evenly through the two D‐rings.
8. Run the nylon cord through the cord lock.
9. Push star wheel into cord lock to hold the nylon cord in place.
10. Tie a knot in the nylon cord and cut the excess, if desired.
Fastening Strap
Seat Upholstery
Fabric Clothing Guard
Cord Lock
Mounting Screw, D-ring
Mounting screw, D-ring
Star Wheel
Nylon Cord
FIGURE 6.21 Installing Fabric Clothing Guards
61
Part No 1127114 Compass™XE and Allegro®