Nqa Server Enable; Nqa Server Tcp-Connect - HP 6125G Command Reference Manual

nqa server enable

Syntax
nqa server enable
undo nqa server enable
View
System view
Default level
2: System level
Parameters
None
Description
Use nqa server enable to enable the NQA server.
Use undo nqa server enable to disable the NQA server.
By default, the NQA server is disabled.
Related commands: nqa server tcp-connect, nqa server udp-echo, and display nqa server status.
Examples
# Enable the NQA server.
<Sysname> system-view
[Sysname] nqa server enable

nqa server tcp-connect

Syntax
nqa server tcp-connect ip-address port-number
undo nqa server tcp-connect ip-address port-number
View
System view
Default level
2: System level
Parameters
ip-address: Specifies the IP address specified for the TCP listening service on the NQA server.
port-number: Specifies the port number specified for the TCP listening service on the NQA server, in the
range of 1 to 50000.
Description
Use nqa server tcp-connect to create a TCP listening service on the NQA server.
Use undo nqa server tcp-connect to remove the TCP listening service created.
Configure the command on the NQA server for TCP tests only.
165