Operation Interface; Password (Ftp Operation View) - HP 6125G Command Reference Manual

post: Transfers data to the HTTP server.
Description
Use operation to configure the HTTP operation type.
Use undo operation to restore the default.
By default, the HTTP operation type is get.
Examples
# Configure the HTTP operation type as post.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type http
[Sysname-nqa-admin-test-http] operation post

operation interface

Syntax
operation interface interface-type interface-number
undo operation interface
View
DHCP operation view
Default level
2: System level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Description
Use operation interface to specify the interface to perform a DHCP test. The specified interface must be
up. Otherwise, no probe packets can be sent out.
Use undo operation interface to restore the default.
By default, no interface is specified to perform a DHCP test.
Examples
# Specify the interface to perform a DHCP test as VLAN-interface 2.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type dhcp
[Sysname-nqa-admin-test-dhcp] operation interface vlan-interface 2

password (FTP operation view)

Syntax
password [ cipher | simple ] password
undo password
139