flash: Enables Flash-related SNMP traps.
default-route: Enables default route traps, which are sent when default routes are deleted.
ospf: Enables SNMP traps for the OSPF module.
•
process-id: OSPF process ID, in the range of 1 to 65535.
ifauthfail: Interface authentication failure traps.
•
ifcfgerror: Interface configuration error traps.
•
ifrxbadpkt: Traps for receiving incorrect packets.
•
ifstatechange: Interface state change traps.
•
•
iftxretransmit: Traps for packet receiving and forwarding events on interfaces.
lsdbapproachoverflow: Traps for approaching LSDB overflow.
•
lsdboverflow: LSDB overflow traps.
•
maxagelsa: Traps for LSA max age.
•
nbrstatechange: Traps for neighbor state change.
•
•
originatelsa: Traps for local LSA generation.
vifcfgerror: Traps for virtual interface configuration error.
•
virifauthfail: Traps for virtual interface authentication failure.
•
•
virifrxbadpkt: Traps for virtual interface receiving error packets.
virifstatechange: Traps for virtual interface state changes.
•
•
viriftxretransmit: Traps for virtual interface receiving and forwarding packets.
virnbrstatechange: Traps for neighbor state change of the virtual interface.
•
pim: Enables SNMP traps for the PIM module.
candidatebsrwinelection: Traps for the winning of a candidate-bootstrap router (C-BSR) in
•
bootstrap router (BSR) election.
electedbsrlostelection: Traps for the losing of the current BSR in BSR election.
•
•
interfaceelection: Traps for the election of a new DR or DF on an interface.
invalidjoinprune: Traps for receiving invalid join or prune packets.
•
invalidregister: Traps for receiving invalid registration packets.
•
neighborloss: Traps for the lost of a neighbor.
•
rpmappingchange: Traps for the change of the current RP-set.
•
standard: Enables the sending of standard traps.
authentication: Enables sending authentication failure traps in the event of authentication failure.
•
•
coldstart: Sends coldstart traps when the device restarts.
linkdown: Globally enables sending LinkDown traps when the link of a port goes down.
•
linkup: Globally enables sending LinkUp traps when the link of a port goes up.
•
warmstart: Sends warmstart traps when the SNMP agent restarts.
•
system: Specifies traps sent when the system time is modified, the system reboots, or the main system
software image is not available.
vrrp: Enables traps for the VRRP module.
authfailure: VRRP authentication failure traps.
•
77