Display Logbuffer - HP 6125G Command Reference Manual

Field
SNMP Agent:
channel number : 5, channel name : snmpagent
Log buffer:
enabled,max buffer size 1024, current buffer size
512,
current messages 512, dropped messages 0,
overwritten messages 740
channel number : 4, channel name : logbuffer
Trap buffer:
enabled,max buffer size 1024, current buffer size
256,
current messages 216, dropped messages 0,
overwritten messages 0
channel number : 3, channel name : trapbuffer
syslog:
channel number:6, channel name:channel6
Information timestamp setting

display logbuffer

Syntax
display logbuffer [ reverse ] [ level severity | size buffersize | slot slot-number ] * [ | { begin | exclude
| include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
reverse: Displays log entries chronologically, with the most recent entry at the top. Without this keyword,
the command displays log entries chronologically, with the oldest entry at the top.
level severity: Specifies a severity level in the range of 0 to 7.
Table 10 Severity description
Severity
Emergency
Alert
Critical
Value Description
0 The system is unusable.
1 Action must be taken immediately.
2 Critical condition.
32
Description
Configurations on the SNMP module destination,
including the channel number and channel name
used.
Configurations on the log buffer destination, including
whether information output to this destination is
enabled or disabled, the maximum capacity, the
current capacity, the current number of messages, the
number of dropped messages, the number of
messages that have been overwritten, and the channel
number and channel name used.
Configurations on the trap buffer destination,
including whether information output to this
destination is enabled or disabled, the maximum
capacity, the current capacity, the current number of
messages, the number of dropped messages, the
number of messages that have been overwritten, and
the channel number and channel name used.
Configurations on the web interface destination,
including the channel number, and channel name
used.
Time stamp configurations, specifying the time stamp
format for log, trap, debug, and log host information.
Corresponding keyword
in commands
emergencies
alerts
critical