Nqa - HP 6125G Command Reference Manual

Description
Use next-hop to configure the next hop IP address for ICMP echo requests of a test group.
Use undo next-hop to remove the configured next hop IP address.
By default, no next hop IP address is configured.
Examples
# Configure the next hop IP address as 10.1.1.1.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] next-hop 10.1.1.1

nqa

Syntax
nqa entry admin-name operation-tag
undo nqa { all | entry admin-name operation-tag }
View
System view
Default level
2: System level
Parameters
admin-name: Specifies the name of the NQA test group administrator who creates the NQA test
operation, a case-insensitive string of 1 to 32 characters, with "-" excluded.
operation-tag: Specifies the tag of a test operation, a case-insensitive string of 1 to 32 characters, with
"-" excluded.
all: Removes all NQA test groups.
Description
Use nqa to create an NQA test group and enter NQA test group view.
Use undo nqa to remove the test group.
If the operation has been configured for the test group, you directly enter NQA operation view when you
execute the nqa command.
Examples
# Create an NQA test group whose administrator name is admin and whose operation tag is test and
enter NQA test group view.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test]
135