HP 6125G Command Reference Manual page 128

Failures due to timeout: 1000
Failures due to disconnect: 0
Failures due to no connection: 0
Failures due to sequence error: 0
Failures due to internal error: 0
Failures due to other errors: 0
Packet(s) arrived late: 0
Voice results:
RTT number: 0
Min positive SD: 0
Max positive SD: 0
Positive SD number: 0
Positive SD sum: 0
Positive SD average: 0
Positive SD square sum: 0
Min negative SD: 0
Max negative SD: 0
Negative SD number: 0
Negative SD sum: 0
Negative SD average: 0
Negative SD square sum: 0
One way results:
Max SD delay: 0
Min SD delay: 0
Number of SD delay: 0
Sum of SD delay: 0
Square sum of SD delay: 0
SD lost packet(s): 0
Lost packet(s) for unknown reason: 1000
Voice scores:
MOS value: 0.99
Table 34 Command output
Field
Destination IP address
Send operation times
Receive response times
Min/Max/Average round trip time
Square-Sum of round trip time
Last succeeded probe time
Packet loss in test
Failures due to timeout
Failures due to disconnect
Failures due to no connection
Failures due to sequence error
Min positive DS: 0
Max positive DS: 0
Positive DS number: 0
Positive DS sum: 0
Positive DS average: 0
Positive DS square sum: 0
Min negative DS: 0
Max negative DS: 0
Negative DS number: 0
Negative DS sum: 0
Negative DS average: 0
Negative DS square sum: 0
Max DS delay: 0
Min DS delay: 0
Number of DS delay: 0
Sum of DS delay: 0
Square sum of DS delay: 0
DS lost packet(s): 0
ICPIF value: 87
Description
IP address of the destination
Number of probe packets sent
Number of response packets received
Minimum/maximum/average round-trip time in milliseconds
Square sum of round-trip time
Time when the last successful probe was finished
Average packet loss ratio
Number of timeout occurrences in a test
Number of disconnections by the peer
Number of failures to connect with the peer
Number of failures due to out-of-sequence packets
122