Info-Center Channel Name; Info-Center Console Channel - HP 6125G Command Reference Manual

<Sysname> system-view
[Sysname] interface GigabitEthernet1/0/1
[Sysname-GigabitEthernet1/0/1] undo enable log updown

info-center channel name

Syntax
info-center channel channel-number name channel-name
undo info-center channel channel-number
View
System view
Default level
2: System level
Parameters
channel-number: Specifies a channel by its number in the range of 0 to 9.
channel-name: Specifies a channel name, a case-insensitive string of 1 to 30 characters. It must be a
combination of letters and numbers and start with a letter.
Description
Use info-center channel name to name a channel.
Use undo info-center channel to restore the default name for a channel.
See Table 7
Examples
# Name channel 0 as abc.
<Sysname> system-view
[Sysname] info-center channel 0 name abc

info-center console channel

Syntax
info-center console channel { channel-number | channel-name }
undo info-center console channel
View
System view
Default level
2: System level
Parameters
channel-number: Specifies a channel by its number in the range of 0 to 9.
channel-name: Specifies a channel by its name, a default name or a self-defined name. For how to
configure a channel name, see info-center channel name.
for information about default channel names and channel numbers.
37