Track Nqa - HP 6125XLG Command Reference Manual

Related commands
display track

track nqa

Use track nqa to create a track entry and associate it with the specified reaction entry of the NQA test
group.
Use undo track to remove the track entry.
Syntax
track track-entry-number nqa entry admin-name operation-tag reaction item-number [ delay { negative
negative-time | positive positive-time } * ]
undo track track-entry-number
Default
No track entry exists.
Views
System view
Predefined user roles
network-admin
Parameters
track-entry-number: Specifies the track entry ID in the range of 1 to 1024.
entry admin-name operation-tag: Specifies the NQA test group to be associated with the track entry. The
admin-name argument is the name of the NQA test group administrator who creates the NQA operation,
and is a case-insensitive string of 1 to 32 characters. The operation-tag argument is the NQA operation
tag, a case-insensitive string of 1 to 32 characters.
reaction item-number: Specifies the reaction entry to be associated with the track entry. The item-number
argument is the reaction entry ID in the range of 1 to 10.
delay: Specifies the amount of time the Track module waits before notifying the application modules that
the track entry state has changed. If this keyword is not specified, the Track module notifies the
application modules immediately when the track entry state changes.
negative negative-time: Specifies the amount of time the Track module waits before notifying the
application modules that the state of the track entry has changed to Negative. The negative-time
argument represents the delay time in the range of 1 to 300 seconds.
positive positive-time: Specifies the amount of time the Track module waits before notifying the
application modules that the state of the track entry has changed to Positive. The positive-time argument
represents the delay time in the range of 1 to 300 seconds.
Usage guidelines
After a track entry is created, you can only use the track nqa delay command to modify its notification
delay settings. To modify other settings, you must delete the entry and create a new one.
Examples
# Create track entry 1 and associate it with reaction entry 3 of the NQA test group admin-test.
<Sysname> system-view
117