Configuration Prerequisites; Configuring Ipv6 Mbgp Route Preferences; Configuring The Default Local Preference; Configuring The Med Attribute - HP 6125G Configuration Manual

IPv6 MBGP protocol preference
•
• Default LOCAL_PREF attribute
MED attribute
•
NEXT_HOP attribute
•
• AS_PATH attribute

Configuration prerequisites

Before you configure IPv6 MBGP route attributes, complete the following tasks:
Enable IPv6.
•
Configure basic IPv6 MBGP functions.
•

Configuring IPv6 MBGP route preferences

Step
1. Enter system view.
2. Enter BGP view.
3. Enter IPv6 MBGP address
family view.
4. Configure preferences for
external, internal, and local
IPv6 MBGP routes.

Configuring the default local preference

Step
1. Enter system view.
2. Enter BGP view.
3. Enter IPv6 MBGP address
family view.
4. Set the default local
preference.

Configuring the MED attribute

Step
1. Enter system view.
2. Enter BGP view.
Command
system-view
bgp as-number
ipv6-family multicast
preference { external-preference
internal-preference
local-preference | route-policy
route-policy-name }
Command
system-view
bgp as-number
ipv6-family multicast
default local-preference value
Command
system-view
bgp as-number
352
Remarks
N/A
N/A
N/A
Optional.
The default preference values of
external, internal, and local routes
are 255, 255, and 130,
respectively.
Remarks
N/A
N/A
N/A
Optional.
By default, the default local
preference is 100.
Remarks
N/A
N/A