Displaying And Maintaining Mbgp; Displaying Mbgp - HP 6125G Configuration Manual

Step
4. Configure the router as a
route reflector and specify an
MBGP peer or a peer group
as its client.
5. Enable route reflection
between clients.
6. Configure the cluster ID of the
route reflector.

Displaying and maintaining MBGP

Displaying MBGP

Task
Display the IPv4 MBGP
routing table.
Display the IPv4 MBGP
routing information matching
the specified destination IP
address.
Display MBGP peer group
information.
Display the advertised
networks.
Display AS path information.
Display MBGP peer
information or peer group
information.
Display the prefix entries in
the ORF information from the
specified BGP peer.
Display MBGP routing
information.
Display MBGP routing
information matching the AS
path list.
Display MBGP CIDR routing
information.
Command
peer { group-name | peer-address }
reflect-client
reflect between-clients
reflector cluster-id cluster-id
Command
display ip multicast routing-table [ verbose] [ | { begin |
exclude | include } regular-expression ]
display ip multicast routing-table ip-address
[ mask-length | mask ] [ longer-match ] [ verbose ] [ |
{ begin | exclude | include } regular-expression ]
display bgp multicast group [ group-name ] [ | { begin |
exclude | include } regular-expression ]
display bgp multicast network [ | { begin | exclude |
include } regular-expression ]
display bgp multicast paths [ as-regular-expression | |
{ begin | exclude | include } regular-expression ]
display bgp multicast peer [ [ ip-address ] verbose ] [ |
{ begin | exclude | include } regular-expression ]
display bgp multicast peer ip-address received ip-prefix
[ | { begin | exclude | include } regular-expression ]
display bgp multicast routing-table [ ip-address [ { mask
| mask-length } [ longer-prefixes ] ] ] [ | { begin |
exclude | include } regular-expression ]
display bgp multicast routing-table as-path-acl
as-path-acl-number [ | { begin | exclude | include }
regular-expression ]
display bgp multicast routing-table cidr [ | { begin |
exclude | include } regular-expression ]
200
Remarks
Not configured by default.
Optional.
Enabled by default.
Optional.
By default, a route reflector uses its
router ID as the cluster ID.
Remarks
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view
Available in any
view