Task
Display information about
join/prune messages to send.
Display IPv6 PIM neighboring
information.
Display information about the IPv6
PIM routing table.
Display the RP information.
Reset IPv6 PIM control message
counters.
IPv6 PIM configuration examples
IPv6 PIM-DM configuration example
Network requirements
Receivers receive VOD information through multicast. The receiver groups of different organizations form
stub networks, and one or more receiver hosts exist in each stub network. The entire IPv6 PIM domain is
operating in the dense mode.
Host A and Host C are multicast receivers in two stub networks N1 and N2.
MLDv1 runs between Switch A and N1 and between Switch B/Switch C and N2.
Command
display pim ipv6 join-prune mode
{ sm [ flags flag-value ] | ssm }
[ interface interface-type
interface-number | neighbor
ipv6-neighbor-address ] *
[ verbose ] [ | { begin | exclude |
include } regular-expression ]
display pim ipv6 neighbor
[ interface interface-type
interface-number |
ipv6-neighbor-address | verbose ]
* [ | { begin | exclude | include }
regular-expression ]
display pim ipv6 routing-table
[ ipv6-group-address
[ prefix-length ] |
ipv6-source-address
[ prefix-length ] |
incoming-interface [ interface-type
interface-number | register ] |
outgoing-interface { include |
exclude | match } { interface-type
interface-number | register } |
mode mode-type | flags flag-value
| fsm ] * [ | { begin | exclude |
include } regular-expression ]
display pim ipv6 rp-info
[ ipv6-group-address ] [ | { begin |
exclude | include }
regular-expression ]
reset pim ipv6 control-message
counters [ interface interface-type
interface-number ]
320
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in user view