Toshiba RemoteEye II User Manual page 71

RemotEye II Control
This page allows the administrator to Enable/Disable the available RemotEye II
communication protocols. In addition, it allows the administrator to restart or reset the
RemotEye II.
BootP/DHCP Status
This field allows the administrator to Enable/Disable the Boot Protocol (BootP)/
Dynamic Host Configuration Protocol (DHCP) support or to view the current settings.
These protocols are Internet standards and are used to obtain a dynamic IP address
from a BootP/DHCP server.
Telnet Connection
This field allows the administrator to Enable/Disable the terminal-to-server
application (Telnet) control process (i.e., telnet 192.168.7.18).
Network Upgrade
This field allows the administrator to Enable/Disable the Trivial File Transfer Protocol
(TFTP) upgrade control or to view the current setting. The Windows upgrade utility,
Tugrade, may be used to upgrade the RemotEye II when enabled.
Reset the RemotEye II to Default
This field allows the administrator to Enable/Disable the RemotEye II Reset function.
When enabled, all parameters in the RemotEye II will be reset to default setting.
Restart the RemotEye II
This field allows the administrator to Enable/Disable the RemotEye II Restart
function. When enabled, the RemotEye II may be restarted.
SNMP Version Control
This field allows the administrator to enable and disable the Simple Network
Management Protocol security level. When enable, administrators has the options to
set for SNMPv1 or SNMPv3
71