Toshiba RemoteEye II User Manual page 69

RemotEye II Configuration
This page allows the administrator to set the RemotEye II local network configuration
parameters. Within the parameters, the Primary Time Server and the Secondary Time
Server can only send out the correct time information to a client that has the
Shutdown program installed.
RemotEye II IP Address
This field allows the administrator to set the IP address of the RemotEye II or to view
the current setting (i.e., 192.9.60.229).
RemotEye II Gateway Address
This field allows the administrator to set the IP address of the gateway or to view the
current setting (i.e., 192.9.60.10).
RemotEye II Network Mask
This field allows the administrator to set the subnet mask of the RemotEye II or to
view the current setting (i.e., 255.255.255.0).
System Name
This field allows the administrator to set the value in System name that is defined in
MIB-II or to view the current setting. This string also serves as the RemotEye II
Client Identifier (CID) in DHCP systems.
System Contact
This field allows the administrator to set the value in System manager (System
Contact) that is defined in MIB-II or to view the current setting.
System Location
This field allows the administrator to set the value in System installation place
(System Location) that is defined in MIB-II or to view the current setting.
History Log Interval
This field allows the administrator to set the polling time (in seconds) of the Input
Voltage, Output Voltage, Output Load, Battery Voltage, Input Frequency, and the
UPS Output Source. The readings will be stored in the history log.
Extended Log Interval
This field allows the administrator to set the consolidation interval (in minutes) to use
in the creation of the extended history log. The UPS parameters will be consolidated
to provide the minimum, maximum, and average values of the parameters that will be
recorded in the extended history log.
69