Toshiba RemoteEye II User Manual page 122

Configuration Groups
The Multi-Machine Configuration Utility window shown in Figure 8 contains two
configuration groups: UPS Configuration and Local Configuration. These
configurations adjust the settings in the RemotEye II Client software.
UPS Configuration
IP Address – allows the user to change the IP Address of the RemotEye II client
Local Configuration
Shutdown Delay – The amount of time after the AC power has been interrupted for
proper shutdown of the client side.
Force Shutdown Delay – Amount of time to properly shutdown the computer using
the Script File after proper shutdown of the Client.
Script File – File used for proper shutdown of the system.
Warn Speaker – produces a tone along with a warning message to indicate that an
error has occurred. The tone will only be produce if the box is checked; otherwise it
will display only the warning message.
Ignore shutdown request – Request to shutdown the system. If the box is checked,
then the systems will NOT shutdown the system. Otherwise, it will execute shutdown.
Function Button Description
Create Template
Selecting the Create Template button will create a template file according to the
configurations of UPS Configuration and Local Configuration. This file should be
named as template.ini.
Configuration
Select the Configuration button on the local machine side and the application will
begin searching for the location of the file upsconfig.ini. This file is created when the
Multi-Machine Configuration is installed on the computer. Once the file is located, it
will modify the associated configurations according to template.ini.
122