Toshiba RemoteEye II User Manual page 129

Upgrading RemotEye II Firmware from Windows via Network
Figure 27: Tugrade, RemotEye II Upgrade Utility via Network
The RemotEye II firmware may be upgraded from a Windows platform by performing
the following procedure.
A PC with a Windows 95/98,2000, or NT operating system installed will be required
for this procedure.
On the PC, create a directory named Upgrade and copy the contents of the RemotEye
II Upgrade CD-ROM to the Upgrade directory.
For network upgrade, ensure that DIP switches 1 and 2 of the RemotEye II are off.
From the Control Group menu, set the TFTP Upgrade Control to Enabled.
From the Upgrade directory, run Tupgrade.exe and a dialog box will be displayed.
Click Discover to search for the RemotEye II on the network.
Select the RemotEye II to be upgraded and enter the password.
Click Open to load the upgrade file.
Path to the upgrade file and select the latest version.
Click Upgrade to transfer the file to the upgradeable read-only memory of the
RemotEye II.
When the transfer is complete the RemotEye II will reboot.
129