Toshiba RemoteEye II User Manual page 37

EMD Group
Main Menu →     T oshiba RemotEye II Configuration →  ( 5) E MD Group (see on page)
The EMD Group menu provides access to the system settings listed below. The
settings may be viewed and changed from this screen.
Temperature Group — The Temperature Group provides the options to setup the low
and high warning and critical points. Users also have the options to setup the
hysteresis and calibration offset from this group.
Humidity Group — The Humidity Group provides the options to setup the low and
high warning and critical points. Users also have the options to setup the hysteresis
and calibration offset from this group..
Alarm-1 Group — The Alarm-1 Group provides the option to setup this dry contact
as normal close, normal open, high active, low active and disabled.
Alarm-2 Group — The Alarm-2 Group provides the option to setup this dry contact as
normal close, normal open, high active, low active and disabled.
Device Status — The Device Status provides the options of disabled and auto. Auto
will enable the RemotEye II to auto detect the EMD that connected to it PC port.
+================================================================+
| [ EMD Group Menu ] |
+================================================================+
1. Temprature Group
2. Humidity Group
3. Alarm-1 Group
4. Alarm-2 Group
5. Device Status : Auto
0. Return to previous menu
Please Enter Your Choice =>
Figure 12: Console EMD Group Menu Description
37