Toshiba Remoteye Ii Application Program; Toshiba Remoteye Ii Client Software - Toshiba RemoteEye II User Manual

Toshiba RemotEye II Application Program

Toshiba RemotEye II Client Software

The Toshiba RemotEye II Client Software runs on servers and connects to a
designated RemotEye II. When the servers start up the RemotEye II scans for the UPS
status. When UPS power events are detected, the RemotEye II broadcasts a Shutdown
command to the workstation. The Toshiba RemotEye II Client Software will
broadcast warning messages (on the screen of the servers) and then shutdown the
server gracefully.
Installation of RemotEye II Client using Windows
9x/2000/NT/XP
Insert the RemotEye II CD-ROM into the CD-ROM drive.
Run the Installer.exe program (on the CD-ROM).
A dialog box will be displayed on the screen, type in the IP address of the designated
RemotEye II, its Client Name, and its Shutdown Delay Time. Click the Def. button to
enter the workstation's name as the Client Name setting (see Figure 20: ).
Upon completion of the setup screen's entries, click OK and the RemotEye II service
will connect to the RemotEye II automatically.
Figure 20: Toshiba RemotEye II Client Software
108