Introduction - Toshiba RemoteEye II User Manual

Introduction

Congratulations on the purchase of your new Toshiba Uninterruptible Power Supply
(UPS) system management tool: the RemotEye II! The RemotEye II supplies a
10/100 base-T network card that allows network administrators to monitor and control
Toshiba UPS systems remotely via Simple Network Management Protocol (SNMP)
and Hypertext Transfer Protocol (HTTP) methods.
This user manual describes the configuration and operation of the RemotEye II. The
RemotEye II is available as a circuit board that is inserted into the option slot of the
UPS or as an external device that connects to the UPS via a provided cable.
The RemotEye II/Internal is designed for the Toshiba UPS that has the option slot.
The circuit board is connected to the UPS via the RemotEye II/Internal card edge
connector.
The RemotEye II/External is designed primarily for use with the Toshiba UPS that
does not have the extension option slot, but it may also be used in a UPS system that
has an extension option slot. The RemotEye II/External communicates with the UPS
via a provided cable.
12