Configuring The Remoteye Ii Via Terminal - Toshiba RemoteEye II User Manual

Configuring the RemotEye II via Terminal

The RemotEye II can be configured by directly connecting to the device.
Hardware Setup
Direct configuration is accomplished through the provided cable. Follow these steps
to setup the hardware for direct RemotEye II configuration:
Connect the DB9 female end of the PC cable to the terminal or workstation COM
port.
Connect the RJ45 end of the PC cable to the PC port of RemotEye II/External or the
COM port of the RemotEye II/Internal.
Software Setup
The direct configuration is accomplished by using the RS232 communication
protocol. The direct communication can be performed from a workstation running
Terminal Emulator Software (TES)
23