Toshiba RemoteEye II User Manual page 114

Execution
After successful installation of the program, users can use the uGuard.sh script to
perform the following action.
Usage: ./uGuard.sh -[h][v][s][S][u][U][d][l][e][g] where
h: This manual page.
v: Show revision information.
s: Start the program now.
S: Start the program at next boot up time.
u: Unload program.
U: Unload program, don't restart at next boot time.
d: Suspend program.
l: List configurations.
e: Modify configurations.
g: See log [/var/log/usha/ug_usha.log].
114