Control Group - Toshiba RemoteEye II User Manual

Control Group

Main Menu →     T oshiba RemotEye II Configuration →  ( 2) C ontrol Group (see Figure
9: Console Control Group Menu Description on page 33)
The Control Group menu provides access to the system settings listed below. The
settings may be viewed and changed from this screen.
1. HTTP Login User Name — The login user name grants write access from a
web browser (the default setting is TOSHIBA).
2. Community Read-Only — This common community name provides read-
only access to devices within this community. (The default setting is public.)
3. Community Read/Write — This common community name provides read
and write access to devices within this community. (The default setting is
public.) This value is equivalent to the terminal/telnet login password.
4. BOOTP/DHCP Control — This parameter is used to enable or disable the
BOOTP/ DHCP requests from RemotEye II.
Enabled).
5. Telnet Control — This parameter is used to enable or disable remote
RemotEye II configuration through telnet applications. (The default setting
is Enabled).
6. Network Upgrade Control — This parameter is used to enable or disable the
Trivial File Transfer Protocol image upgrade. When disabled, RemotEye II
will block any attempts to upgrade. ( The default setting is Disabled.)
7. HTTP Security Control — This parameter is used to enable or disable the
web password protection feature. When enabled, a password is required to
access RemotEye II through the web, and write privileges are automatically
assumed. When disabled, any machine can access RemotEye II over the
web, but a password is required prior to assuming write privileges. (The
default setting is Disabled.)
8. SNMP Version Control —This parameter is used to enable and disable the
Simple Network Management Protocol security level.
administrators has the options to set for SNMPv1 or SNMPv3.
9. Return to Previous Menu
32
(The default setting is
When enable,