Transferring Program Data From The Memory Card To The Controller - DURKOPP ADLER 745-34 Manual

Sewing unit for runstitching of piped flap and welt pocket openings and pocket corners

Hide thumbs Also See for 745-34:

Table of Contents

3.1.1

Transferring program data from the memory card to the controller

Machine parameters, program sequences and pocket programs can be

transferred to the memory card individually.

CAUTION:

The machine must not be switched off during the transfer of data to the

controller.

When programs are transferred from one machine to another only the

program sequences and pocket programs are transferred.

–

While the main screen is displayed insert the memory card in the

side of the controller in the direction of the arrow.

The panel with lettering must be towards the operator.

–

Select the transfer direction with the "F4" key.

–

Select the required parameter with cursor keys "ï" or "ð".

A black background appears behind the symbol of the selected

parameter.

CAUTION: danger of breakage

The working mode is important.

Only transfer data for the correct working mode.

Machine parameters

Program sequences

Pocket programs

–

Press function key F5 .

The data transfer begins.

Table of Contents

Show Quick Links

Table of Contents