22
Selecting the positioning point
Depending on the type of piece being sewn, positioning takes place at
the rear, centre or front positioning point.
Rear positioning point (with respect to the operator)
Centre positioning point
Front positioning point (with respect to the machine)
head)
Distance from the centre positioning point to the rear
positioning point
Entry:
NB:
The entry is checked.
If the fixed sewing length and the value entered
cannot be sewn on the machine, suitable values
are automatically used.
Initialising program memory
The program function is to load standardised factory setting for the
seam-pattern parameters.
–
Press function key F3.
"Initialise sewing program?" appears in the display.
–
Press function key F5.
The parameters are reset to the factory-set values.
10 ... 170 [mm]