6.2 Machine parameters (
Code
42
+
or main switch on +
The machine parameters describe the machine's technical
configuration as well as its settings and their adjustment values.
CAUTION:
Changes to machine settings usually entail mechanical conversion.
For this reason this program section is only accessible after the entry
of code number "25483".
Info line:
with/without automatic corner blade
–
Press the "RST" key or turn the main switch on and press function
key "F1".
The code-number entry box appears in the display.
–
Enter code number "25483" on the decimal keypad.
Once the correct code number has been entered the display
switches to the machine-parameter screen.
If an incorrect code number is entered the display switches to the
main screen.
–
Select the required parameter with cursor keys "ð", "ï", "ò" or
"ñ".
A black background appears behind the symbol.
–
Activate the selected parameter with the "OK" key.
–
Change the selected parameter as described in section 4.2.
–
To leave machine parameters press the "RST" key or turn off the
main switch.
)