DURKOPP ADLER 745-34 Manual page 67

Seam-end corner-blade correction value
Entry: -99.9 ... 99.9
Seam-start corner-blade correction value
Entry: -99.9 ... 99.9
Hint:
The value entered is valid for all pocket programs.
If the seam-end value is changed, the seam-start value is automatically
corrected.
Distance from the centre-blade incision to the seam ends (x)
(see the illustration at the foot of page 60)
Entry: - 99.9 ... 99.9
Hint:
This value depends on the needle distance and the relevant corner blade.
Left-corner-blade seam-start zero-point correction
(automatic corner-blade station only)
Entry: -13 ... 13
Hint:
The blade brackets 1 and 2 must be parallel.
Left corner blade seam-end zero-point correction
(automatic corner-blade station only)
Entry: - 13 ... 13
Hint:
The blade brackets 3 and 4 must be parallel.
4
3
1
2
65