Testing Needle And Centre-Blade Activation - DURKOPP ADLER 745-34 Manual
Sewing unit for runstitching of piped flap and welt pocket openings and pocket corners
Hide thumbs
Also See for 745-34:
- Parts list (87 pages) ,
- Service instructions manual (86 pages) ,
- User manual (84 pages)
Table of Contents
Advertisement
6.3.6
Testing needle and centre-blade activation
66
This program tests the activation of the needles and the centre blade
with the machine running.
Info line:
activating needle, centre blade
–
Press OK to start the program.
–
Press function key F3:
once to start the sewing drive at 1000 rpm,
a second time to increase the sewing-drive speed to 3000 rpm
and a third time to stop in position 2 (thread lever up)
–
The centre blade is switched on and off with function key F4.
–
The needles are switched on and off with function key F5.
–
Press function key F1 to leave the test program.
CAUTION:
Before leaving the program the machine head must be run for a short
time with the needles and centre blade switched off
otherwise the next seam will not be properly executed.
Hide quick links:
Advertisement
Table of Contents
