Resetting The Nbg-416N; Using The Reset Button - ZyXEL Communications NBG-416N User Manual

2.3 Resetting the NBG-416N

If you forget your password or IP address, or you cannot access the Web
Configurator, you will need to use the RESET button at the back of the NBG-416N
to reload the factory-default configuration file. This means that you will lose all
configurations that you had previously saved, the username will be reset to
admin and password will be reset to 1234. The IP address will be reset to
"192.168.1.1".

2.3.1 Using the RESET Button

Make sure the power LED is on.
1
Press the RESET button for longer than 1 second to restart/reboot the NBG-416N.
2
Press the RESET button for longer than five seconds to set the NBG-416N back to
3
its factory-default configurations.
NBG-416N User's Guide
Chapter 2 The Web Configurator
21