What You Can Do - ZyXEL Communications NBG-416N User Manual

Chapter 6 Wireless LAN

6.2 What You Can Do

Wireless screens vary according to the device mode you are using.
Wireless
Screen
General
MAC Filter
Advanced
QoS
WPS
WPS Station
Scheduling
AP Select
WLAN Info
See Chapter 4 on page 37
• Use the General screen to enable the Wireless LAN, enter the SSID and select
the wireless security mode
• Use the MAC Filter screen to allow or deny wireless stations based on their
MAC addresses from connecting to the NBG-416N
• Use the Advanced screen to allow intra-BSS networking and set the RTS/CTS
Threshold
• Use the QoS screen to enable Wifi MultiMedia Quality of Service (WMMQoS).
This allows the NBG-416N to automatically set priority levels to services, such
as e-mail, VoIP, chat, and so on
• Use the WPS screen to quickly set up a wireless network with strong security,
without having to configure security settings manually
• Use the WPS Station screen to add a wireless station using WPS
on page
• Use the Scheduling screen to set the times your wireless LAN is turned on and
off (Section 6.10 on page
• Use the AP Select screen to choose an access point that you want the NBG-
416N (in universal repeater or client bridge mode) to connect to. You should
know the security settings of the target AP.
• Use the WLAN Info screen to view the SSID and security of the selected AP
wireless network.
72
Router







for more information on device modes.
(Section 6.4 on page
(Section 6.6 on page
87).
87).
Access Point Universal
Repeater
 
 
 
 
 
 
 

75).
(Section 6.5 on page
83).
(Section 6.7 on page
Client Bridge



81).
85).
(Section 6.8 on page
(Section 6.9
NBG-416N User's Guide
86).