Domain Name - ZyXEL Communications NBG-416N User Manual

3.2.2 Domain Name

The Domain Name entry is what is propagated to the DHCP clients on the LAN. If
you leave this blank, the domain name obtained by DHCP from the ISP is used.
While you must enter the host name (System Name) on each individual computer,
the domain name can be assigned from the NBG-416N via DHCP.
Click Next to configure the NBG-416N for Internet access.
Figure 9 Wizard Step 1: System Information
The following table describes the labels in this screen.
Table 3 Wizard Step 1: System Information
LABEL
System
Name
Domain
Name
Back
Next
Exit
NBG-416N User's Guide
DESCRIPTION
System Name is a unique name to identify the NBG-416N in an Ethernet
network. Enter a descriptive name. This name can be up to 30
alphanumeric characters long. Spaces are not allowed, but dashes "-" and
underscores "_" are accepted.
Type the domain name (if you know it) here. If you leave this field blank,
the ISP may assign a domain name via DHCP. The domain name entered
by you is given priority over the ISP assigned domain name.
Click Back to display the previous screen.
Click Next to proceed to the next screen.
Click Exit to close the wizard screen without saving.
Chapter 3 Connection Wizard
25