ZyXEL Communications NBG-416N User Manual page 62

Chapter 5 Tutorials
There are two WPS methods for creating a secure connection. This tutorial shows
you how to do both.
• Push Button Configuration (PBC) - create a secure wireless network simply
by pressing a button. See
• PIN Configuration - create a secure wireless network simply by entering a
wireless client's PIN (Personal Identification Number) in the NBG-416N's
interface. See
since one device can authenticate the other.
5.2.1.1 Push Button Configuration (PBC)
Make sure that your NBG-416N is turned on and that it is within range of your
1
computer.
Make sure that you have installed the wireless client (this example uses the
2
NWD210N) driver and utility in your notebook.
In the wireless client utility, find the WPS settings. Enable WPS and press the WPS
3
button (Start or WPS button)
Log into NBG-416N's Web Configurator and press Push Button in the Network >
4
Wireless Client > WPS Station screen.
Note: Your NBG-416N has a WPS button located on its panel, as well as a WPS
button in its configuration utility. Both buttons have exactly the same function;
you can use one or the other.
Note: It doesn't matter which button is pressed first. You must press the second
button within two minutes of pressing the first one.
The NBG-416N sends the proper configuration settings to the wireless client. This
may take up to two minutes. Then the wireless client is able to communicate with
the NBG-416N securely.
62
Section 5.2.1.1 on page
Section 5.2.1.2 on page
62.This is the easier method.
63. This is the more secure method,
NBG-416N User's Guide